石塑電梯門套具有什么樣的特性及其施工方式呢?
石塑電梯門套是由石塑線條和石塑uv板組合而成的,整個電梯門套線分為三個部分,兩個豎梁和一個橫梁。施工前先將電梯口的基礎做好,基礎的要求就是平整,關于電梯和墻壁間的縫隙要用細木工板打基礎,也就是用細木工板支一個木頭盒子,用釘子和膠固定在電梯口的側板。下面具體講一下他具有什么樣的施工要求吧。
The stone plastic elevator door pocket is composed of stone plastic lines and stone plastic UV plates. The whole elevator door pocket line is divided into three parts, two vertical beams and one cross beam. Before construction, the foundation of the elevator entrance shall be well prepared. The first requirement of the foundation is leveling. The gap between the elevator and the wall shall be laid with blockboard, that is, a wooden box shall be supported with Blockboard and fixed on the side plate of the elevator entrance with nails and glue. Let's talk about what kind of construction requirements he has.
石塑電梯門套是用硅密封膠和泡棉膠粘,在處置完其基礎之后,然后根據現場的尺寸,先把側板切出來,把泡棉膠先粘在板上面,然后再用硅密封膠進行點粘;之后再貼在細木工板上面,對其之后按壓平整就可以。
Firstly, the stone plastic elevator door pocket is glued with silicone sealant and foam adhesive. After the foundation is disposed, the side plate is cut out first according to the size of the site, the foam adhesive is glued on the plate first, and then the silicone sealant is used for spot bonding; Then stick it on the blockboard and press it flat.
石塑線條要根據不同規格的切出一個45°角,然后用硅密封膠點粘,要同時與側板、對角對齊。這就是石塑電梯門套線的一大特性,施工簡單,省時又省力。
The stone plastic lines shall be cut at an angle of 45 ° according to different specifications, and then glued with silicone sealant, which shall be aligned with the side plate and diagonal at the same time. This is a major feature of the stone plastic elevator door pocket line. The construction is simple, time-saving and labor-saving.
石塑電梯門套的主要特性有以下幾點:
The main characteristics of stone plastic elevator door pocket are as follows:
1、B1級防火、在用火燒時、無黑煙,非常的,不會對人體造成危害;
1. Class B1 fire prevention, no black smoke when burning with fire, very, and will not cause harm to human body;
2、其具有非常好的耐酸性及耐堿特性;
2. It has very good acid resistance and alkali resistance;
3、石塑電梯門套的比重非常的輕,雖然有石材的外表,但是其重量確實石材的1/10,非常有利于減少建筑物的稱重及抗震能力;
3. The proportion of stone plastic elevator door pocket is very light. Although it has the appearance of stone, its weight is indeed 1 / 10 of that of stone, which is very conducive to reducing the weighing and seismic capacity of buildings;
4、石塑電梯門套還具有非常好的耐磨特性,非常容易清潔,維護的本錢也非常的低,也非常的好維護;
4. Stone plastic elevator door pocket also has very good wear-resistant characteristics, very easy to clean, the maintenance cost is also very low, and it is also very easy to maintain;
5、石塑電梯門套自重輕,因此其耐久性也非常的好,其使用的壽命也非常的長;
5. Stone plastic elevator door pocket has light weight, so its durability is also very good, and its service life is also very long;
6、石塑電梯門套因為不需要龍骨,直接粘貼即可使用,因此不僅減少了安裝的時間,也減少了安裝的空間;
6. Stone plastic elevator door pocket can be used directly without keel, so it not only reduces the installation time, but also reduces the installation space;
7、石塑電梯門套因為是可以直接使用標準產品的,因此很多時候其可以直接進行安裝,非常的便捷,不會浪費太多的時間,大大的縮短的施工期限。
7. Because the stone plastic elevator door pocket can directly use the standard products, it can be installed directly in many cases, which is very convenient and will not waste too much time and greatly shorten the construction period.
以上就是為大家介紹的有關鋁合金電梯門套的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.zzhzbsx.com
The above is the detailed introduction of aluminum alloy door pocket. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://m.zzhzbsx.com
下一篇:電梯門套線采購前需要注意什么?上一篇:不銹鋼玻璃門如何包邊?